Brand: dEVIAN pRINT
Product Code: VG4 Performer
Availability: In Stock
29.90€

Available Options

Qty

The VGuard 4 Performer is designed to minimize line snag points when using a Gopro Hero 4 with a Tonfly Performer helmet, specially during canopy deployment, to make your jumps safer and even more FUN!

It may be locked in place with the aid of 2 screws and/or VHB adhesive tape.

NOTE: If you want to replace your aluminum mount for a safer one, this is the mount you are looking for. It is designed so you can take advantage of the existing holes of the aluminum mount, so you don't have to drill new ones. Distance between screws is 26mm.

It has approximately 50 degrees of tilt angle, that also allows the removal of the camera from the housing without having to remove the housing from the mount.

If you are not using the camera, you can leave the mount on the helmet, because it is 100% snag free.

Fits: GoPro Hero 4 with Standard housing or Blackout housing, GoPro Low Cost. See images for reference.

Kit includes:

  • 1 VGuard 4 Performer
  • 1 M5x30 slotted screw
  • 1 M5 nut
  • 2 M4x15 slotted screws
  • 2 M4 nuts
  • 2 M4 washers

Weight: ~39 grams (with screws)

Dimensions (L x W x H): 41 x 75 x 47

3D printed in ABS plastic, 100% recyclable.

Write a review

Note: HTML is not translated!